As a mechanical component, the electric screwdriver cannot work without the batch power supply. The batch power supply provides energy and related control functions for the electric screwdriver. Drive the motor rotation. Because the parameters of the electric screwdriver motor are not the same, the speed will be different when the electric batch power output is the same.
1. Do not beat the electric screwdriver (beware of collision or falling, otherwise it will produce motor noise and screwdriver shaking phenomenon).
2. Pull the plug of the electric screwdriver and the supporting controller, and the base of the plug should be used. The wire should not be pulled forcibly to avoid damage to the contact plug.
3. When the electric screwdriver is shaken, it must be stopped to avoid further damage to the electric screwdriver, and inform the management to schedule maintenance.
4. When the electric screwdriver has an abnormal problem, it will inform the administrator in time to send it to the maintenance personnel for repair. The general abnormal phenomenon is: the driver does not rotate, the driver speed is not smooth, the driver head is easy to fall off or there is shaking, and the driver will not stop.
5. When the torque of the electric screwdriver is too small to meet the needs of use, stop using it and notify the management personnel in time to arrange for the replacement of the electric screwdriver with large torque.
6. When pressing the start button, if the electric screwdriver cannot be rotated due to too small torque, it should be noted that this should be controlled within 10 seconds to avoid damage to the motor in the electric screwdriver.
